3M™ Cushion-Mount™ E1320H Plusz lemezszerelő szalag
- | Válassza ki a termékopciókat az azonosítókhoz.
Részletek
Kiemelések
- Sárga, flexografikus lemezrögzítő szalag légbuborék-kivezető tulajdonságokkal és magas lemezoldali tapadással
- 0.51 mm vastagság
- Medium soft
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
- Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
Habosított kliséragasztó szalag, 0,51 mm vastagság, közepes habsűrűség, sárga szín. Erősebb klisé oldali tapadóerő.
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for high speed printing of combination work when halftone areas exceed solids. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.
Tipikus Tulajdonságok
Hasonló termékek
| Teljes szélesség (metrikus) | 457,2 Milliméter | |
| Termék színe | Sárga | |
| Hordozó/hátlap típusa | Polietilén hab | |
| Ragasztóanyag típusa | Differenciális akrilát |
3M™ Cushion-Mount™ E1320H Plusz lemezszerelő szalag